| Contact Info |
Daleville, IN
Time Zone:
EDT (GMT-5/-4)
|
• Voice:
765.378.3315 |
•Fax:
765.378.3316 |
|
•Web:
Precision WWW |
|
Precision Abrasive Machinery
Prepoint and Chamfer
Prepoint and Chamfer Machine
|
 |
| |
Prepoint and Chamfer Machine. Used for generating chamfers on carbide tool blanks economically, this machine may also be used to prepoint drills.
- Twin V-Belt Drive on Grinding Spindle
- 3 HP Drive Motor on Main Spindle
- 1/2 HP Drive Motor on Work-head (DC)
- Computerized Microprocessor Controlled
- Programmable Stepper Drive on Feed Side
- 2 Operating Modes
- Uses 1/4 by 6 or 3/8 by 6 Vitrified Wheel Type 1A1
- Precision Abrasive Auto-Load Unit
- Tool Retrieval system PAM INC
Technical Specifications
| Tool Size Range |
3 mm to 1/2" Diameters, over 1/2" manually |
| Tool Length Range |
1 1/2" to 6" |
| Type Chamfers |
Standard 45 degree |
| Prepoint Angles |
118°, 135°, up to 140° |
| Cycle time estimates |
Chamfering small blanks 10 seconds, Prepointing 1/2" drills, 65-85 seconds |
Machine Specifications
| Required Floor Space |
4' x 4' x 52" high |
| Weight |
Approximately 1400 lbs. |
| Top Plate |
1 1/4" |
| Electrical Requirements |
220/440 VAC 3-Phase |
| Required Air Supply |
80 to 90 lbs. PSI |
|
|
