Products
Automatic Saw
Semi-Auto Saw
Prepoint & Chamfer
Auto Plunge Grinder
Super Prepoint Machine
Standard Chamfer
Flatting Machine

Contact Info
Daleville, IN
Time Zone:
EDT (GMT-5/-4)
• Voice:
765.378.3315
Fax:
765.378.3316
E-Mail:
Sales
Service
Web:
Precision WWW

Precision Abrasive Machinery - Product Line

Fully Automatic Carbide & Ceramic Cut-off Machine Fully Automatic Carbide & Ceramic Cut-off Machine

Clean and accurate cuts with no chips or ragged ends. Just lay the rods on the rod table and program the diameter, overall length and feed rate. The machine will do the rest.

  • Faster Computer
  • More Powerful Table Drive
  • Completely Enclosed & Sealed Screw Drive
  • Menu Driven Set-up with Operator Interface
  • Accepts 2 length parameters per bar
 
»
(More)
   
Semi-Automatic Carbide & Ceramic Cut-off Machine for Carbide or Ceramics

Semi-Automatic Carbide & Ceramic Cut-off Machine for Carbide or Ceramics

Fast accurate cutting of up to 1-1/2" diameter carbide or ceramic rod

  • Twin V-Belt Drive on Grinding Spindle
  • 3 HP Drive Motor on Main Spindle
  • 1/2 HP Drive Motor on Work-head (DC)
  • PLC Controlled Operation
  • Programmable Stepper Drive on Feed Side
  • 2 Operating Modes
  • Uses 1/4 by 6 or 3/8 by 6 Vitrified Wheel Type 1A1
  • Precision Abrasive Auto-Load Unit
  • Tool Retrieval system PAM INC
 
»
(More)
   
Super Prepoint Machine Super Prepoint Machine

This machine is designed & built to grind prepoint angles and chamfers on larger tool blanks. It is mainly used for the production of drill blanks. It has the capability of grinding and holding length tolerances on blanks, so they can be put between centers later. It features dual grinding wheels for roughing and finishing of points

  • Direct drive 5 HP Boneham - Turner Spindle.
  • Uses 8” diameter wheels.
  • 5 axis servo drives by G.E. Fanuc (AC Digital Servo’s).
  • Tools are loaded and unloaded from tool tables to avoid chips.
  • Complete enclosures available at additional cost.
  • Variable speed drives on both workhead and main spindle
 
»
(More)
   
Prepoint and Chamfer Machine Prepoint and Chamfer Machine

Prepoint and Chamfer Machine. Used for generating chamfers on carbide tool blanks economically, this machine may also be used to prepoint drills.

  • Twin V-Belt Drive on Grinding Spindle
  • 3 HP Drive Motor on Main Spindle
  • 1/2 HP Drive Motor on Work-head (DC)
  • Microprocessor / PLC Controlled Operation
  • Programmable Stepper Drive on Feed Side
  • 2 Operating Modes
  • Precision Abrasive Auto-Load Unit
  • Tool Retrieval system PAM INC.
 
»
(More)
   
Standard Chamfer Machine Standard Chamfer Machine

This machine was developed from our larger Prepoint & Chamfer Machine to meet the growing demand for 45 deg. chamfers on all round carbide tooling. It retains many of the same features as the Prepointer on a smaller and easier to use machine.

  • Direct Drive 3 Hp. Grinding Spindle W/Air Purge
  • 1/2 Hp. Variable Speed Drive Motor On Workhead
  • Fanuc Control – Versamax PLC
  • Operating Modes (Manual And Automatic)
  • Uses 1/4, 3/8 or 3/8 By 6” Diameter Vitrified Wheel Type 1A1
  • Precision Abrasive Auto-Load Unit
  • Tool Retrieval System, PAM Inc.
 
»
(More)
   
Flatting Machine Flatting Machine

This machine is designed & built to grind Weldon flats, automotive tangs, whistle stops, split tool ends to centerline, and plunge round blanks automatically. It is a fully automatic, hopper fed machine.

  • Direct drive 7½ HP Boneham - Turner Spindle.
  • 4 axis servo drive by G.E. Fanuc (AC Digital Servo’s).
  • G.E. Fanuc Operator Interface Unit.
  • Uses 8” diameter wheels.
  • Precision Abrasive Auto Load Unit with Tool Hopper.
  • Complete enclosures available at additional cost.
 
»
(More)
   
Automatic Plunge Grinder

Automatic Plunge Grinder

Designed exclusively for economical production of straight and angular forms on carbide blanks. This unit will work well with either vitrified or resinoid wheels.

  • Microprocessor Controlled
  • 3 Operating Parameters - Auto, Single Tool, Manual
  • Touch Pad Operator Interface
  • Servo Drive (Single Axis) Grind Size Parameters Programmable
  • 5 HP Drive with Variable Speed
  • 1/8 HP D.C. Work head Drive
  • 3" Spindle with Sopko Taper
 
»
(More)
   
 
 
   
© Nelson Mark/SCCG, 2006.